In Depth Analysis: CalculatedRisk Newsletter on Real Estate (Ad Free) Read it here.

Tuesday, November 16, 2010

Industrial Production, Capacity Utilization Flat in October

by Calculated Risk on 11/16/2010 09:15:00 AM

From the Fed: Industrial production and Capacity Utilization

Industrial production was unchanged in October after having fallen 0.2 percent in September. ... The capacity utilization rate for total industry was flat at 74.8 percent, a rate 6.6 percentage points above the low in June 2009 and 5.8 percentage points below its average from 1972 to 2009.
Capacity Utilization Click on graph for larger image in new window.

This graph shows Capacity Utilization. This series is up 9.7% from the record low set in June 2009 (the series starts in 1967).

Capacity utilization at 74.8% is still far below normal - and well below the pre-recession levels of 81.2% in November 2007.

Note: y-axis doesn't start at zero to better show the change.

Industrial ProductionThe second graph shows industrial production since 1967.

Industrial production was unchanged in October, and production is still 7.3% below the pre-recession levels at the end of 2007.

This was below consensus expectations of a 0.3% increase in Industrial Production, and an increase to 74.9% for Capacity Utilization.